Heat & Glo Fireplace Repair in Snohomish County, WA

IntelliFire module flashing, pilot refusing to catch or a remote that went silent? We handle Heat & Glo fireplace repair for homes across Snohomish County, from Lake Stevens to Lynnwood. Pricing is upfront, you approve it before we start, and our tech finds the real fault.

A Perfect 5.0 on Google From 200+ Homeowners
Tell Us What Your Heat & Glo Is Doing

    Brands We Work On

    Why Heat & Glo Owners Call Sound Comfort

    Heat & Glo builds sophisticated direct vent fireplaces with electronic ignition. When one stops working, you need someone comfortable with gas controls and low-voltage electronics both.

    Ignition systems are routine

    IntelliFire, IntelliFire Plus and IntelliFire Touch modules, pilot assemblies, flame sensors and valves are everyday work for our gas technicians.

    01

    We read the signals

    Flash and LED patterns point toward a fault. We confirm with meter tests instead of swapping a module on a hunch.

    02

    Safety checks every visit

    Licensed, bonded and insured. We test gas connections, confirm a clean flame and look over the vent system before leaving.

    03

    Whole-home heating help

    We also repair furnaces, heat pumps and mini-splits. If another system needs attention, we can often look at it the same trip.

    04
    Posted on Google
    John Owens profile picture
    John Owens
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Service was awesome. Fast and efficient and Mauro was a delight to work with. I would recommend them to everyone!
    Posted on Google
    Mike Sloy profile picture
    Mike Sloy
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Fantastic service. My fireplace is now in perfect condition. I can’t say enough about this company, and Mario.
    Posted on Google
    Melissa Graves profile picture
    Melissa Graves
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Great job! Very nice.
    Posted on Google
    Judy Sloan profile picture
    Judy Sloan
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Hannah was awesome to schedule with! Great service all around!
    Posted on Google
    James Andrews profile picture
    James Andrews
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Our technician, Mauro was fantastic. Pricing up front, great communication, and my fireplace is as good as new. Thank you Sound Comfort, and great job Mauro.
    Posted on Google
    Sarah Ena profile picture
    Sarah Ena
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Mauro was incredible. Super personable, explained things in a clear way, and did great work on our old furnace. Would highly recommend!
    Posted on Google
    J. White profile picture
    J. White
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Exceptional work! The service was great and our fireplace is as good as new. Thank you Mauro!
    Posted on Google
    Matt Smythe profile picture
    Matt Smythe
    Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
    Fantastic service. Service was quick and they kept me informed on what they were doing. Mauro was friendly and didn’t try to upsell any services that weren’t required
    Verified by Trustindex
    Trustindex verified that these reviews were published on Sound Comfort Heating and Air Conditioning's Google Business Profile. Learn more

    Heat & Glo Trouble Areas We Fix

    Heat & Glo sells gas fireplaces and inserts in many series, from Primo II and Escape to Twilight, Cerona and SlimLine. Most calls fall into four groups, outlined below with quick answers.

    IntelliFire Ignition Faults

    IntelliFire is an intermittent pilot system: the pilot lights only when you call for fire, then the main burner follows. That design saves gas, but it depends on a good spark, a clean flame sensor and a healthy module. A carbon-coated sensor alone can stop the burner from opening.

    Problems we fix

    Pilot lights but main burner stays off

    Repeated clicking, then lockout

    Flash code on the control module

    Fireplace works only some days

    Common IntelliFire ignition questions

    Why does my pilot light and then everything shuts down?

    The module must prove the flame through the sensor rod before it opens the main valve. Carbon on the rod, a weak ground or loose wiring can break that proof, so we clean and test it.

    What do the flashing lights on the module mean?

    They are fault signals, such as a wrong fuel setting, low igniter voltage or a valve that won’t open. The pattern depends on the model, so write down what you see and tell us when you call.

    Gas fireplace insert with a decorative surround, heat and glo fireplace repair by Sound Comfort Heating in Snohomish County, WA

    Batteries, Power and Backup

    IntelliFire systems rely on household power with a battery backup, and the batteries sit in the control box near the lower controls. Dead cells, a failed transformer or a switch left in the wrong position cause a surprising number of no-start calls on otherwise healthy fireplaces.

    Problems we fix

    Dead fireplace after a power outage

    Backup batteries drained or corroded

    Switch set to wrong position

    Transformer or wiring problems

    Common power and battery questions

    Will my Heat & Glo run during a power outage?

    Many IntelliFire models switch to battery operation when power drops, usually with the control switch set to ON. Fresh batteries matter, and the blower may not run on backup.

    Should I leave old batteries in the control box?

    No. Replace them yearly with fresh ones of the type your system uses, and remove them if directed once power returns. Corroded batteries can damage the contacts.

    Freestanding gas stove fireplace, gas stove repair in Everett

    Remotes, Wall Controls and Wi-Fi

    Newer Heat & Glo fireplaces use handheld remotes, touchscreen controllers and in some cases an app through a Wi-Fi module. When flame height, fan speed or on and off commands stop responding, the problem may be the remote, the receiver or the wiring behind the wall switch.

    Problems we fix

    Remote does nothing

    Fan or flame height not adjusting

    Child lock or lockout confusion

    App or Wi-Fi module offline

    Common remote and control questions

    My remote stopped working. Is the fireplace broken?

    Start with new remote batteries and check the control switch. If the fireplace works at the wall but not the remote, the pairing or receiver is likely at fault, and we can test it.

    Why won't the app connect to my fireplace anymore?

    Router changes, a new password or a weak signal near the fireplace can drop a Wi-Fi module. Reconnecting may help, and if it doesn’t, we check the module and its power.

    Gas log set burning, gas fireplace repair in Everett

    Older Models and Glass Issues

    Many Snohomish County homes still hold Heat & Glo units from earlier decades, including older standing-pilot designs. Age brings worn thermocouples, hazy or cracked glass, tired gaskets and blowers that grind. Parts for some older models take effort to source, and we tell you what we find.

    Problems we fix

    Hazy, filmy or sooty glass

    Worn gaskets around the door

    Noisy or failing blower

    Standing pilot that keeps going out

    Questions about older Heat & Glo units

    Can you still repair an older Heat & Glo?

    Usually yes. We trace the fault first, then check parts availability before quoting. If a part is hard to get, we say so up front and talk through options.

    Why does the glass keep getting a white film?

    Normal gas combustion leaves a thin deposit that bakes on over time. Clean it only when the glass is cool, with a cleaner made for fireplace glass, and tell us if soot appears.

    Outdoor gas fireplace with a stone surround, outdoor fireplace repair in Everett

    How We Get Your Heat & Glo Working Again

    Sound Comfort Heating technician beside a lit gas fireplace after a repair in Snohomish County

    Step 1: Call or Book

    Give us your model name if you know it and describe the flashing lights or symptoms. We pick a visit time that fits.

    Step 2: Price Before Repair

    We test the system, explain what failed and quote the repair. Nothing happens until you tell us to go ahead.

    Step 3: Flame Back On

    We finish the repair, run the fireplace through a full cycle, check gas connections and walk you through the controls.

    Signs Your Heat & Glo Needs Service

    Electronic fireplaces tend to warn you before they quit. Slow starts, odd clicking and repeated lockouts all signal wear in the ignition, sensor or valve. A small repair now can spare you a cold evening when guests are due.

    Module flashing the same pattern repeatedly

    Pilot lights, then burner never follows

    Fireplace needs several tries to start

    Cloudy glass, soot or burning smell

    Smell gas? Don’t try to light the fireplace or touch switches. Get everyone outside, then call 911 or your gas utility. Puget Sound Energy is 1-888-225-5773. When it’s safe, call us at (425) 225-4756.

    Talk to a real person, 24/7
    Gas fireplace in a white surround, heat and glo fireplace repair by Sound Comfort Heating in Snohomish County, WA

    Keeping a Heat & Glo Reliable

    Electronic ignition is dependable when the basics are kept up. A few habits protect the module, the sensor and the glass between professional visits.

    Refresh Control Batteries

    Change the backup batteries in the control box each fall, using the type your system calls for. Weak cells are a leading cause of lockouts and no-starts.

    Keep the Lower Area Clean

    Dust and pet hair collect near the burner and sensor and can disturb ignition. Have the area cleaned during a yearly service rather than reaching in yourself.

    Protect the Glass

    Clean only when cool, using a product made for fireplace glass. Skip abrasives and household sprays, which can etch the surface or bake into a film.

    Test the Remote Often

    Run the fireplace from the remote and the wall switch early in the season. If one works and the other doesn't, you've found the failing piece before you need it.

    Carbon Monoxide Safety

    Direct vent fireplaces send exhaust outdoors, but a damaged vent, cracked glass or poor flame can still affect the air inside. Keep a working carbon monoxide alarm on every level and near bedrooms, test it monthly, and have your fireplace and venting checked yearly.

    Protect Your Heat & Glo With a S.M.A.R.T. Gas Fireplace Plan

    A yearly visit cleans the pilot, sensor and glass, checks batteries and venting, and tests gas connections so your fireplace is ready the first time the weather turns.

    Gas Fireplace Plan

    $259/yr

    Natural gas and propane fireplaces

    Furnace Plan

    $159/yr

    Add a gas or electric furnace

    Heating and Cooling Plan

    $259/yr

    Cover furnace, AC or heat pump

    Included with every plan

    Prefer a single tune-up this year? Book one online or give us a call.

    Heat & Glo Repair Questions

    Yes. We serve Snohomish County broadly, including Lake Stevens, Everett, Marysville, Lynnwood, Snohomish and Monroe. Call with your address and we’ll confirm a visit time that works for you.

    IntelliFire is Heat & Glo’s electronic ignition. It lights the pilot only when you want a fire, so a failing igniter, sensor or module keeps the fireplace from starting at all.

    Turning the control switch off and on, or fresh batteries, sometimes clears a one-time lockout. If the same fault returns, something is actually failing, and repeated resets only delay the repair.

    We service most major gas fireplace, insert and log set brands, including Napoleon and Regency. Tell us the make and model when you call and we’ll prepare for the visit.

    That narrows it to the remote, its batteries or the receiver pairing. The ignition system itself is probably healthy, which usually makes this a quick and inexpensive fix.

    If it lights and burns normally, yes. If you see soot, smell burning or gas, or the glass is cracked, shut it off and wait. Never override safety controls to force a flame.

    Driver side of the Sound Comfort Heating and Air Conditioning service van